Construction Services Built for Texas Infrastructure
Materials testing, geotechnical engineering, and construction and code inspections, delivered by a single accredited firm in Midland, TX. Same field crew. Same lab. Same certified reports your AHJ, lender, and EOR will accept.
Three Disciplines. One Firm. Full Accountability.
On most projects, materials testing, geotechnical engineering, and code inspections live at three different firms. That means three contracts, three schedulers, and three sets of paperwork that have to line up before the lender releases funds or the AHJ signs off on Certificate of Occupancy.
Magrym Consulting handles all three under one accredited roof in Midland, Texas. Our AASHTO accredited materials lab, our licensed Professional Engineers, and our ICC certified Special Inspectors work from the same drawings and the same chain of custody. When the report has to match, it matches, because the same firm wrote both halves.
That single point of accountability is the whole reason this Construction Services practice exists. If your soils have you scratching your head, or your CO is held up waiting on a Final Special Inspection Report, call Magrym and we will help you make a plan.
Three Construction Disciplines, Fully Integrated
Pick one. Pick all three. Either way, the data flows between them and the reports are signed and sealed by the same firm.
Materials Testing
AASHTO accredited lab testing on soils, concrete, asphalt, aggregates, and SFRM fireproofing. Field sampling, in-place density, coring, and chain-of-custody documentation. Certified reports your EOR, your AHJ, and TxDOT will accept on the first submittal.
- Soils, aggregates, concrete, asphalt
- SFRM fireproofing (ASTM E605 / E736)
- Field inspections and daily reports
- Concrete and pavement coring
Geotechnical Engineering
Subsurface investigations, soils characterization, and foundation design signed by a licensed Texas PE and PG. Pavement design for lease roads and TxDOT projects. Slope stability analyses for cuts, fills, dams, and produced water containments. Reports written so the EOR can build off them on day one.
- Soils characterization (SPT, Shelby, USCS)
- Pavement design (AASHTO, TxDOT FPS-21)
- Foundation design (drilled piers, mats)
- Slope stability (Bishop, Janbu, Spencer)
Construction & Code Inspections
ICC certified Special Inspections required by IBC Chapter 17 for permit closeout. Steel, bolting, welding, and rebar inspections under AISC 360, AWS D1.1, and ACI 318. Construction observation paired with code inspection so the owner sees both the contractual and statutory side of the work, on the same logs.
- Steel, bolting, welding (AWS CWI on staff)
- Reinforced concrete (ACI 318 Ch 17 / 26)
- ICC Special Inspection program management
- Final SI Report for Certificate of Occupancy
What to Expect When You Hire Magrym
You get one firm answering the phone, one PM coordinating the schedule, and one report package that ties testing, geotechnical recommendations, and Special Inspections to the same project number.
- AASHTO accredited lab in Midland, TX
- Licensed PE and PG oversight on every deliverable
- ICC certified Special Inspectors (S1, S2, S3, Soils, F1)
- TxDOT-prequalified work categories
- HUB & DBE certified, Minority-Owned
Markets We Serve
Construction Services work across every project type our firm supports, from $50K pad sites to $50M public infrastructure.
Energy & Oil & Gas
Pavement design and density verification for lease roads under frac sand and water haul loads. Geotechnical recommendations for tank pads, compressor stations, and produced water containments. Permian Basin operators we have worked alongside since 2018.
Transportation & TxDOT
TxDOT-prequalified materials testing on Items 340, 341, and 344 asphalt; subgrade compaction on Items 132 and 247. Pavement design per FPS-21 and MEPDG. Construction observation on state and county transportation projects.
Commercial & Residential
Geotechnical reports and Special Inspections for schools, hospitals, retail buildings, hotels, and multifamily. IBC Chapter 17 program management from drawings through Final SI Report and Certificate of Occupancy.
Municipalities & Government
HUB and DBE certified for state, county, and federal contract requirements. Testing and inspections on water, sewer, paving, and public facility projects. Single-source compliance documentation for grant-funded work.
Our Construction Services Process
From kickoff scoping through Final Special Inspection Report, we keep you informed at every stage.
Scope & Scheduling
We review your drawings, your geotech, and the Statement of Special Inspections. We map every required test and inspection to your construction schedule before the first truck rolls.
Field Mobilization
Our technicians and ICC certified inspectors are on-site for placement, with calibrated equipment and same-day field reports. Issues are flagged before they are buried, not after.
Lab Testing & Inspection
Samples come back to our AASHTO accredited Midland lab. Results are reviewed by a licensed PE or PG before release. Special Inspection logs are filed daily and tracked against the schedule.
Certified Reports & Closeout
You receive sealed, AHJ-ready report packages, including the Final Special Inspection Report required for Certificate of Occupancy. One firm. One signature block. No coordination calls.
Frequently Asked Questions
Construction Services at Magrym include three integrated disciplines: Materials Testing (soils, concrete, asphalt, SFRM, coring), Geotechnical Engineering (subsurface investigation, foundation design, pavement design, slope stability), and Construction and Code Inspections (IBC Chapter 17 Special Inspections, steel and rebar, ICC compliance, construction observation). All three operate from the same Midland, TX office, the same AASHTO accredited lab, and the same project number, so reports do not have to be reconciled across separate firms.
Most commercial and public projects need both. They cover different questions and different statutory triggers.
| Materials Testing | Construction & Code Inspections | |
|---|---|---|
| What it verifies | The material installed meets the spec (strength, density, gradation) | The work installed meets the code (welds, bolting, rebar placement, anchorage) |
| Driven by | Project specs and EOR requirements | IBC Chapter 17 and the AHJ permit |
| Required for permit closeout? | Typically no | Yes. Final SI Report needed for Certificate of Occupancy |
| Who performs | ACI / AASHTO certified lab technicians | ICC certified Special Inspectors (S1, S2, S3, Soils, F1) |
Magrym provides both, on the same crew, with one PM running the schedule.
Yes. Our Midland, Texas materials testing laboratory holds full AASHTO accreditation. That means our equipment calibration, test procedures, and quality management system meet the national standards required for TxDOT, federally funded transportation work, and most municipal submittals. Accreditation also gives our concrete, asphalt, and soils results legal standing on disputed projects.
Yes. We are a Special Inspection agency staffed with ICC certified inspectors in the categories most commercial and public buildings require: S1 Structural Steel and Bolting, S2 Structural Welding, S3 Reinforced Concrete, Soils, and F1 SFRM. We manage the program from the Statement of Special Inspections through the daily logs and the Final Special Inspection Report that the AHJ needs to issue the Certificate of Occupancy.
Magrym Consulting is licensed and actively working in five states: Texas, New Mexico, Oklahoma, North Dakota, and Colorado. Our PE licenses cover all five jurisdictions, and our PG license covers Texas. We are headquartered in Midland, Texas, with the bulk of our project volume in the Permian Basin and along the I-20 and I-10 corridors.
Ready to Scope Your Construction Project?
Materials testing, geotech, and code inspections from one accredited firm. Midland, TX.